High Quality Polyurea Self-Leveling Floor From Source Factory

• Customization: Available
• Color: Grey
• Appearance: Liquid
• Model NO.: SRT-AB
• Main Raw Material: Polyurea
• Method: Roller
• Level: Polyurea Layer
• Drying Method: Air Drying
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Ceramic
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Type: Flooring
• Ceiling Tile Shape: Liquid
• Thickness: 1.2mm
• Usage: Outdoor, Indoor
• Ceiling Tile Type: Polyurethane
• Transport Package: Standard Export Package
• Specification: A 16kgs B 4kgs
• Trademark: ON THE WAY
• Origin: Shandong China
• HS Code: 3909500000
• Production Capacity: 160000t/Year
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 2.000kg
• Lead Time: 5 days (1 - 1000 kg) ; To be negotiated ( > 1000 kg)

Product Description

Product Description

SRT-A/B is a solvent-free, two-components, manually scraped polyurea self-leveling material that is cured on site. At normal temperature, the self-leveling material can quickly cure and the coating is dense and non foaming. This product has excellent mechanical properties, medium resistance, outdoor aging resistance, and excellent interlayer adhesion

Product Parameters

 

1) Can cure at room temperature, surface dry within 2 hours, and dry within 12 hours
2) Excellent physical and chemical properties, with good adhesion to various substrates.
3) The construction is convenient and highly efficient, and the design thickness requirements (hundreds of micrometers to several centimeters) can be achieved in one construction.
4) Good leveling performance, overall film-forming, continuous, dense, seamless coating, beautiful and practical.
5) Using manual scraping and coating construction, it is simple, convenient, and controllable.
6) Free from solvents, heavy metals, and environmentally friendly.
7) 100% solid content, free of volatile organic compounds (VOCs), environmentally friendly.
8) has excellent anti-corrosion performance, effectively protecting the substrate from corrosion.

Technical Data

	Solid content	100%
	Appearance(20ºC)	A:Grey Liquid B: Transparant a little red brown liquid
	Mix ratio	A:B =   3 :1
	Mix temperature(ºC)	Room temperature
	Surface dry time(min/25ºC)	≤2h
	Actual dry time(h/25ºC)	≤12h
	Hardness(Shore D)	50±3
	Tensile strength(MPa)	8
	Elongation at break(%)	100
	Akron abrasion( cm3)	0.15

No.	Test Items		Test Standards	Requirement	Test Results	Conclusion	Remarks
1	Condition in container		GB/T 22374-2018 6.3.2	After stirring, it is in a uniform state without hard lump	After stirring, it is in a uniform state without hard lump	Approved
2	Film appearance		GB/T 22374-2018 6.3.4	The surface is flat and not clear Visible shrinkage holes Floating color, flower, rise Wrinkles, pinholes, cracks Equivalence phenomenon	The surface is flat, and there is no obvious shrinkage floating color, wrinkled pinhole cracking and other phenomena	Approved
3	Drying time	Surface dry time,h	GB/T 22374-2018 6.3.3	≤8	2h	Approved
		Actual dry time,h	GB/T 22374-2018 6.3.3	<24	12h	Approved
4	Hardness (Shore D)		GB/T 2411-2008	/	59
5	Abrasion resistance(750g/500r)CS-10,g		GB/T 1768-2006	≤0.030	0.022	Approved
6	Tensile bond strength	Standard condition MPa	GB/T 22374-2018 6.3.8	≥2.0	3.1	Approved

		After soaking MPa	GB/T 22374-2018 6.3.8	≥2.0	2.4	Approved
7	Impact resistance	Underload             (500g steel ball)	GB/T 22374-2018 6.3.10	Coating film no cracks, no peeling	Coating film no cracks, no peeling	Approved
		Heavy load (1000g steel ball)	GB/T 22374-2018 6.3.10	Coating film no cracks, no peeling	Coating film no cracks, no peeling	Approved
8	Skid resistance		GB/T 4100-2015	≥0.50	0.54	Approved
9	Water resistance (168h)		GB/T 9274-1988	No bubble, no flake, allows slight discoloration, 2h after recovery	No bubble, no flake, allows slight discoloration, 2h after recovery	Approved
10	Chemical resistance	Alkaline resistance (20%NaOH,72h)	GB/T 9274-1988	No bubble, no flake, allows slight discoloration	No bubble, no flake, allows slight discoloration	Approved
		Acid resistance (10%H2SO4,48h)	GB/T 9274-1988	No bubble, no flake, allows slight discoloration	No bubble, no flake, allows slight discoloration	Approved
		Oil resistance (120# solvent oil, 72h)	GB/T 9274-1988	No bubble, no flake, allows slight discoloration	No bubble, no flake, allows slight discoloration	Approved
11	Artificial aging resistance, 400h		GB/T 1865-2009 GB/T 1766-2008	No foaming, no peeling, no cracking, powder ≤1, discoloration ≤2	No foaming, no peeling, no cracking, powder ≤1, discoloration ≤2	Approved

Application

(1)Indoor floors, terraces, balconies, corridors, and other environments;
(2)Parking lot floor
(3)Silent flooring for schools, hospitals, etc., dust-free workshop flooring, anti-corrosion flooring for production workshops, and anti-corrosion and wear-resistant protection for warehouse flooring;
(4)Micro elastic silent self leveling floor and impact resistant self leveling floor

Packaging & Shipping

A=15kgs/drum     B=5kgs/drum

Storage

(1) The materials should be stored in a dry, cool, and well ventilated environment, avoiding direct sunlight and rain, and kept away from sources of fire.
(2) Under the original packaging condition and specified storage conditions, the shelf life of the product is 12 months from the production date.  After opening, please use it as soon as possible. If not in use, it must be resealed and stored.
(3) This product does not contain organic solvents and can be transported as a non hazardous material. During transportation, rain and sunlight should be strictly prohibited to avoid severe collisions with materials
(4) It should be neatly and steadily stacked, and comply with relevant regulations of the transportation department

Construction Conditions

1. Base surface requirements: The concrete base surface should be cleaned, repaired flat, and polished to a certain roughness. Ensure that the concrete curing is completed and the strength reaches to C25 or above, with a moisture content below 8%. After processing the base surface, the next process should be carried out as soon as possible.
2.  Environmental temperature and humidity requirements: The environmental temperature at the construction site should be above 5 ºC, and construction can only be carried out when the relative humidity is less than 85%
3. Ventilation conditions: Ventilation should be maintained during construction.

 

Operation Methods Requirements

(1)Before use, pour component B into a mixing bucket and add the corresponding mass of component A by electronic weighing in proportion. Stir thoroughly for 2-3 minutes to prevent uneven mixing at the bottom of the bucket and local non solidification of the floor. Ready to use and prepare, the prepared polyurea self leveling should be used up within 15 minutes.( Attention: The mixed material should not be placed in the bucket. It should be poured onto the foundation of the construction to avoid rapid solidification of the material)
(2)During construction, in order to ensure interlayer adhesion, polishing treatment should be carried out (note: polishing floating dust must be cleaned with a vacuum cleaner). Then, a solvent-free epoxy sealing primer should be applied by rolling. After the primer is completely cured, the polyurea self leveling composite material should be mixed evenly in proportion. Then, pour this composite material onto the floor and scrape it evenly with a trowel (3mm or 5mm trowel can be selected according to thickness requirements).
(3)After the surface dry absolutely, normally about 12 hours, then please add the colored PU topcoat.
Mix the two components of topcoat A and B thoroughly for 2-3 minutes, and then apply them evenly on the floor using a high-quality, non depilatory short hair roller (suggestion: 1. Use tape to remove impurities; 2. Cover the roller with stockings is also ok). Suggested coating area: approximately 0.2kgs/square meters. Attention: During construction, it is necessary to adhere to the principle of "dedicated personnel for ingredient preparation.", "multiple shortages and continuous supply"; the paint should be used up within 30 minutes.
Using tools:
Dust free grinding machine, industrial vacuum cleaner, angle grinder, airless spraying machine (optional), steamed bun knife, roller barrel, defoaming drum, brush, measuring instrument, electric mixer, textured paper, etc.
(4) In order to prevent contamination of the construction edge and maintain a completely straight line (or boundary with the unpainted part) at the processing area, protective tape should be applied, and the ingredients should be kept clean to avoid impurities. Construction equipment and tools should be kept clean.
(5) Try not to arrange construction on summer nights to avoid mosquitoes falling and affecting the surface aesthetics of the coating;
(6) Do not pour self leveling materials into the sewer;
(7) Smoking is strictly prohibited at the construction site.
(8)  Under normal circumstances, the paint film should be cured for at least 7 days after completion of painting to ensure optimal performance of the paint film.

Suggested Use QTY
1.2kg/mm/m2,
waterproof national standard thickness 1.5mm, single square meter  dosage 1.8kg,
anti-corrosion national standard thickness 2.0mm, dosage 2.4kg.

Construction steps:

 

FAQ

1. What products does your company specialize in?
We specialize in plastic running track materials and polyurea products. Our running track materials, made from high-quality PU and EPDM rubber, are durable, elastic, and eco-friendly, ideal for sports fields and schools. We also offer spray polyurea, brushable polyurea, self-leveling polyurea, and polyaspartic coatings for waterproofing, flooring, and corrosion protection.

2. Do you offer customized solutions?
Yes, we provide customized formulations and construction solutions tailored to meet specific project requirements.

3. Are your products environmentally friendly?
Absolutely. All our products comply with international environmental standards, using eco-friendly raw materials that are non-toxic and pollution-free.

4. What are the main applications of polyurea?
Polyurea is ideal for roofing waterproofing, industrial equipment anti-corrosion, tunnel lining, sewage tanks, and parking lots. It provides excellent durability, waterproofing, and corrosion resistance.

5. What is the difference between brushable and spray polyurea?
Brushable polyurea is designed for small or intricate areas, offering easy application. Spray polyurea is better suited for large areas, ensuring high efficiency and uniform coatings.

6. Can your polyurea withstand extreme temperatures?
Yes, our polyurea products perform well under extreme conditions, maintaining stability from -40°C to 120°C.

7. Do your products resist chemical corrosion?
Yes, our polyurea has strong resistance to acids, alkalis, and salts, making it suitable for chemical plants, wastewater treatment facilities, and other harsh environments.

8. How long does the coating last after application?
When applied and maintained correctly, our polyurea coatings can last over 20 years.

9. Do you provide technical support for application?
Yes, we offer comprehensive technical support, including training, on-site guidance, and optimized solutions for your projects.